Products
Line Resolver Standard Type
HOME > Products > Line Resolver Standard Type
image1

SPECIFICATION

Item Specification
Model LR**M12W
Rod Diameter(mm) 18, 20, 22.4, 28, 36, 45, 55, 71, 80, 90, 100, 112, 125, 140
Stroke(mm) 2000
Absolute Pitch(mm) 12.8
Resolution(μm) 1.56
Repetition Accuracy(μm) 10
Linearity(mm) 0.15+L/5000(L:stroke)
Operating Temperature(°C) -10~120
Storage Temperature(°C) -10~120
Vibration Resistance 1.47×102m/s2(20~400Hz)
Shock Resistance 0~1.23×103m/s2
Insuration Resistance 20MΩmin. Input and Case
(measured by 500 VDC insulation resistance tester)
Protection Structure IP67
Extensible Cable Length(m) 200
Applicable Converter RCP-TM Series

MODEL CODE

MODEL CODE
Item Code Description
1 Model Classification LR Line Resolver
2 Rod Diameter(mm)
3 Rod Configuration M Cu+Cr plated rod
T Cr plated rod
C Core inserted rod
R Ring core inserted rod
4 Absolute Pitch(mm) 12 12.8(standard)
8 8.192(high accuracy)
5 Excitation Method W Two-phase(standard)
T Three-phase(high accuracy)
6 Operating Temperature(°C) S -10~80
H -10~120
7 Stroke(mm)
8 Mouting Style
9 Lead Cable Length(m)

OUTLINE

OUTLINE

CONVERTER

RCP:Binary Output
RCP:Binary + Pulse Output
HCP

SPECIFICATION

Item Specification
Series RCP Series HCP Series
Output Type Binary Binary + Pulse
(Composite)
Binary Pulse
High-Accurate
Sensor-enabled
Converters
Input/Output
(DC24V)
RCP-WM-100-B0 RCP-WM-100-B0P RCP-WM-024-B0 HCP-WM-024-P
Input/Output
(DC48V)
RCP-WM-100-B1 RCP-WM-100-B1P RCP-WM-024-B1
Position Detection Format Phase Difference Semi-Absolute Postion Detection -
Resolution 13bit/pitch(8192 division) 12bit/pitch(4096 division)
Position Sencing Stroke 0-2047 pitch -
Frequency Response(kHz) 5 5
Input Signal Data Renewal Stop, Zero Position Setting, Error Reset -
Output Signal Binary Photo-coupler isolation NPN transister open collecter 24bit+timing signal -
Pulse - Line Driver Pulse Output + Busy Output
(Select from A/B Phase,
2 Pulse, and Symbol + Pulse)
- Line-Driver
other Alarms* Alarms and Pulse Output Error* Alarms* Alarms*
Binery Data Update Cycle Select from 0.2ms/0.4ms/0.8ms/1.6ms/3.2ms/6.4ms -
Pulse Frequency Response - 2MHz maxmum - 2.5MHz maximum
Supply Power(V) AC100~240(+10%/-15%) DC24 DC24
Power Consumption(VA) 46 or less 0.47A or less (Currnt Consumption) 0.1A or less (Currnt Consumption)
Operating Temperature(°C) 0~55 0~55 0~55
Exterior Dimensions(mm) 50(W)×270(H)×140(D) 65(W)×270(H)×140(D) 50(W)×270(H)×140(D) 30(W)×180(H)×100(D)
Weight(kg) Approximately 1.4 Approximately 1.6 Approximately 1.3 Approximately 0.5
*Alarm signal output transister turns ON during nomal operating Positive logoc.

CABLE

SPECIFICATION

Item Two-Phase
Standard Type
Two-Phase
Heat Resistant Type
Material Tinned annealed copper wire
Rated Temperature(°C) 60 150
Number of Construction 40/0.08
Norminal Cross-Sectional Area(mm2) 0.2
Insulater Polyethylene Flourine Resin
Sheath Vinyl Flourine Resin
Conductor Resistance(Ω/km) 101 103
Sheath External Diameter(mm) 8.2 7.4

CROSS SECTION

CROSS SECTION

CONNECTION

CONNECTION

Contact us:
TEL.+81-75-325-2888
Contact us by email

Page Top